1688 Store 丨 Chinese
Home
Product Center
Food life industry
Automobile machinery industry
Bathroom hardware industry
Air conditioning and refrigeration industry
Other
O-Ring
News
Common Problem
Industry News
Company News
About Us
Company Profile
Corporate Culture
Equipment
Contact Us
Online inquiry
NEWS
Related Products
Air-conditioning Refrigeration O-ring Seal
Silicone Bracelet
Silicone Earphone Sleeve
Rodent Pioneer Silicone Toys
Silicone Wristband
Rodent Pioneer Silicone Toy Production
How to install the hydraulic seal ring
The method of correctly installing the hydraulic seal ring is as follows: 1. Check the relevant surfaces of piston, cylinder barrel and installation guide sleeve to ensure they are clean, free of burrs and edges. 2. The installation tools shall be smooth without edges and sharp corners to ensure that the seals will not be damaged in any form during installation. 3. During installation, a small amount of grease can be painted on the relevant surfaces of the seal and cylinder barrel to facilitate installation, but residual grease is not allowed between the rubber elastomer and the sliding sealing ring, otherwise the sealing performance will be affected. 4. Whether it is vertical or horizontal installation, the coaxiality of piston and cylinder barrel shall be maintained. Excessive eccentricity is likely to damage the seal. 5. The installation speed should not be too fast, otherwise the seal will be damaged.
05-24